If you just listen to background music, new shows, etc., you can use the cheap audio cables that come in the package with your audio components. But only if you are not too concerned about sound quality and what components you are hooking up to the cables. Usually you will invest about 5-7percent of the systems cost in your cables. This is usually adequate. Several types and many brands of audio cables can be found.
People who want improved sound quality for listening can find something in their price range from cable specialists. Specialized cables provide optimum sound quality and are very sturdy. These are a better alternative to generic speaker cables which offer lower sound quality and aren’t as sturdy. Although the specialized cables may be affordable, the cost still could be several hundred dollars for the speaker cables or analog audio interconnects. Some people may find that the extra money spent is well worth the benefits of better sound and pride in owning the very best in audio equipment.
A cable has one basic purpose: transference of signal from point A to point B without interference. For audio frequencies the goal is minimization of loss through the control of Resistance, Capacitance, and Inductance. The four basic types of cables that can be used for these purposes are analog audio cables, audio video cables, Audio speaker cables, and digital cables.
RCA audio cables have one connection for the left audio channel, and one connection for the right audio channel, as they are grouped in stereo pairs. The connections are used for passing analog line-level audio signals between components. You need to use low capacitance, well shielded cables for line level analog interconnects so that interference and outside noise do not drift into the signal.
Video Cables are possibly the most critical cables since the signals that pass through them are at very high frequencies. The higher it is, the more critical to have a proper impedance, proper shielding and good teminations that audio-video cables should provide. So, a video cable must be well shielded and must keep the proper typical impedances.
Audio speaker cables are normally quite thick and have two wires: they may be tipped using spade lugs, banana plug or simply bare wires. It is required to be sure that the connections are really tight to the amplifier and the loudspeakers to reduce contact resistance to a minimum. You should never forget to keep the speaker cables as short as possible and avoid looping cables too much since this may augment cable inductance slightly.
A special group of cables is digital audio cables. There are two types: optical and coaxial. Optical cables transmit digital audio signals as pulses of light. Coaxial digital cables look like standard analog RCA cables, but instead transfer digital audio signals. They are typically a single cable, whereas analog RCA cables are usually double plugs, for stereo audio.
Depending on your choice of audio requirements for sound quality, there are a host of cables available in the market. Most general purpose users do not need to look at the brands and quality of cables and the cheapest ones that come packages with the equipment work fine. Choosier customers may have to spend several hundred dollars to satiate their high quality desires. The main objective of these specialized cables is to transmit audio signals from one point to another unchanged. This involves minimizing losses by controlling Resistance, Inductance and Capacities at audio frequencies. Various specialized audio cables include audio video cables, audio speaker cable, analog ones and digital cables.
